Walk-In Cooler Rentals For Construction Sites
Reliable temporary cold storage for remodels and building sites
Whether you’re working on a kitchen remodeling project or managing a large construction site, you have a lot of hungry workers to feed for an extended duration — especially if you’re working in remote areas. And if you’re remodeling a commercial kitchen, you may also need to arrange temporary cold storage while the location’s walk in is inaccessible.
Polar King cold storage rental units offer flexible short- and long-term options to fit the needs of your specific project.
Sanitary and efficient walk-in coolers and freezers for construction sites
Polar Leasing walk-in coolers and freezers provide a convenient, hygienic solution for construction sites. Whether you’re renovating a commercial kitchen or expanding a growing restaurant, our walk ins keep perishable ingredients, beverages, and other food supplies optimal temperatures, making sure that standards stay consistent throughout the construction process.
Each highly efficient unit uses polyisocyanurate rigid board insulation completely encapsulated in smooth fiberglass inside and out. The antimicrobial surface is easy to clean without any crevices where bacteria can form, and because it’s white, the interior of the unit is significantly lighter and brighter than sheet metal alternatives.
Unlike refrigerated trailers, our walk in coolers for kitchen remodels are conveniently placed at ground level, making access easy and avoiding the risk of falling associated with climbing ramps to elevated trailers.
Compliant cold storage for kitchen remodeling projects
Polar Leasing’s units are designed to meet or exceed all health and safety regulations. Our walk-in coolers and freezers comply with FDA and OSHA guidelines. They also meet the requirements for National Sanitation Foundation (NSF) certification, which require that our units be safe for food contact and inhibit the growth of bacteria and mold.
Want more information on how Polar Leasing supports kitchen remodeling and restaurant projects? Check out our Restaurants & Emergency Refrigeration page.
Customization options
- Standard or custom sizes
- Dual-temperature units available
- Adjustable shelving
- Bright interior lighting
- Antimicrobial surfaces
- Backup power (optional)
- Custom configurations for door and entry
Fast delivery and setup
You don’t need to wait for a walk in cooler for your construction site. At Polar Leasing, we have the largest refrigerated rental fleet in the US and are ready to ship your rental through our nationwide distribution network. We ship our standalone units fully assembled, and they arrive ready to operate with a simple electrical hookup.
Want to find out more about our walk in coolers for construction sites or kitchen remodels?
Frequently Asked Questions
Can a temporary walk in cooler rental be billed directly to a general contractor or equipment dealer rather than the end client?
Yes. Polar King offers subletting and third-party billing options specifically designed for contractors, equipment dealers, and project managers who need to arrange refrigeration on behalf of a client. This allows the rental to be invoiced to the contracting party rather than the end operator, simplifying the billing process for renovation and new construction projects. Contractors managing multiple simultaneous locations can also consolidate billing across projects through a single account relationship with Polar King.
How quickly can a rental unit be delivered and operational during a renovation?
Polar King rental units arrive fully assembled and are operational within hours of a standard electrical connection, removing the setup time that would otherwise delay a return to service during a remodel or new build. There is no installation crew or refrigeration technician required on site — once the unit is placed and connected to power, it is ready to operate. For projects with a defined start date, scheduling delivery in advance ensures the unit is in place before the permanent walk in becomes inaccessible.
What size rental units are available for a renovation project?
Polar King walk in rental units are available in configurations that accommodate both refrigerated and frozen storage needs, including dual-temperature units that consolidate both functions into a single delivery and reduce the footprint required on a constrained renovation site. For projects that need to replace both a cooler and a freezer simultaneously, a single dual-temperature unit eliminates the need for two separate deliveries. Rental terms run from one week to multi-year, so the unit stays in place for the full duration of the project regardless of how the construction timeline shifts.
Can a temporary walk in cooler be placed on-site during a remodel without requiring site preparation?
Yes. Temporary walk in cooler rentals are designed for outdoor placement and require only a standard electrical connection to begin operating. The ground-level design eliminates the ramp access required by refrigerated trailer alternatives, reducing fall risk and improving throughput in an already congested work environment. The surface must be reasonably level and stable for the unit to operate properly.
How does a ground-level rental unit compare to a reefer trailer for maintaining cold storage during a renovation?
A ground-level walk in rental unit eliminates the ramp access required by refrigerated trailer alternatives, reducing fall risk and improving the flow of product in and out during a busy renovation period. Unlike reefer trailers, which run on diesel refrigeration systems that generate noise, fumes, and fuel costs, Polar King units are fully electric, making them practical in active work environments where air quality and noise are concerns. Polar King units also use polyisocyanurate insulation fully encapsulated in seamless fiberglass, so exterior temperature swings and construction dust do not create hot spots the way panel seams do on blown-in foam alternatives.
What health and safety compliance standards do Polar King temporary rental units meet?
Polar King temporary rental units are NSF certified, FDA compliant, and OSHA compliant, meeting the food safety and worker safety standards that health departments apply to temporary cold storage in active construction and renovation environments. NSF certification specifically requires that units be safe for food contact and inhibit the growth of bacteria and mold, and this standard applies across the full rental fleet regardless of the application. Ground-level placement and fast operational setup mean cold storage compliance is not dependent on an extended installation window.
What rental term options are available for a walk in cooler replacement project with an uncertain completion date?
Rental agreements are structured with a defined start and end date, but Polar King will work with customers on penalty-free extensions when a project runs longer than planned. This gives project managers a firm baseline commitment while preserving flexibility if the construction timeline shifts. Dual-temperature units are also available for projects that need to replace both cooler and freezer function in a single rental.
Does Polar King carry enough fleet inventory to support multiple simultaneous renovation projects?
Polar King maintains one of the largest electric-powered refrigerated rental fleets in North America, with depot locations throughout the continental United States and Canada. This scale allows contractors managing multi-location renovation programs to source units for several sites simultaneously without competing for limited regional inventory. Contractors with ongoing renovation programs are encouraged to establish a direct account relationship with Polar King to coordinate scheduling and billing across projects.