The pixel

GPS Replacement

Installation Instructions

  1. Remove Screws from GPS Enclosure (Note: Old GPS’s will Start with 466 and New GPS’s with 467).
  2. Cut or Remove White and Red wires from fuses.  (Note: Wires may be Soldered Together and not Wire Nutted).
  3. Press orange tabs to remove Black, Blue/White, Blue, and Orange Wires from Terminal Strip.
  4. Remove old GPS Enclosure.
  5. Install new GPS Enclosure.
  6. Wire Nut Red and White wires to Fuses.
  7. Reinstall Black, Blue/White, Blue, and Orange Wires into Proper Terminals. Lift orange tabs to secure.
  8. Screw New GPS to the GPS Enclosure.